| TECHNICAL SPECIFICATIONS |
MC2 Finish |
| Casing | Manually milled and drilled aluminium |
| Cover | 0.2 mm thick,coated with 24 ct. gold foil |
| Color | Anodized
in gold colored finish (scratch resistant.) |
| Terminals | Soft iron,shaped by grinding and milling |
| Connectorpins | 1.3 x 20 mm, 14 ct. solid gold pins |
| Screw bushes | 2,5 mm brass treaded bushes mounded into casing |
| Magnet | Permanent. 5 Cat : rare earth magnet) |
| Power: max BH (Kj/m3) 280 | |
| Coil | 2 mm x 2 mm Teflon Type c 1004 |
| Coil windings | 20 micron gold handwinding wire |
| Stylus holder | Solid boron rod : 0.3 mm x 7 mm |
| Angle of stylus in holder : 0° | |
| Stylus tip |
TIP FG S HIGH TECH diamond,highly polished finish. |
| Rounded radius 5 micron | |
| Shock absorption | High Tech rubber, 100 SCHOR |
| Tension wire | Steel wire spring, code 1007 |
| TECHNICAL DATA | |
| Coil impedance | 32 Ohm |
| Load impedance | 845 Ohm |
| Load capacity | 150 pF |
| Stylus pressure | 1.8 Grams, (Max Tolerance 0.05 Gram) |
| Output Voltage | 200 µV |
| Max tracing capacity | 400 µmm |
| Channel separation | 70 dB at 100 Hz |
| 60 dB at 1 Khz | |
| 70 dB at 20 Khz | |
| Frequency range | 3 Hz to 100 Khz |
| Total THD % | 0.1
% |
| Total unit weight | 10
Grams ( incl. socket screws) |
| The
technical data specified above are dependent on the actual arm used in the equipment. |
Test
Equipment : Goldmund Turntable / Air Tangent arm with exterior wiring NEUTRIK AUDIO TEST A 1 and TP 402 |
