TECHNICAL SPECIFICATIONS

MC1 ECO

Casing Manually milled and drilled aluminium
Cover 0,3 mm thick  coated with 24 ct. gold foil.
Color Anodized in gold-colored finish (scratch resistant)
Terminals Soft iron, shaped by grinding and milling
Connector pins 1,3 mm x 20 mm, 8 Kt Solid Gold
Screw bushes 2,5 mm brass threaded bushes mounded into casing
Magnet Rechargeable principle 
Power: max. BH  (Kj/m3°)  41
Coil      2 mm x 2 mm, soft iron type c 1003 (handwound)
Coil windings 15 micron copper hand-winding wire.
Stylus holder Boron/Ruby,Sapphire, 0,3 mm x 7 mm
Angle of stylus in holder : 20°.
Stylus tip          TIP FG II. High-tech diamond.Swiss.
Rounded radius 4 micron
Shock absorption        High-tech rubber, 100 SCHOR
Tension wire Steel wire spring, code 1007
TECHNICAL DATA
Coil impedance 22  Ohm
Load impedance  100 Ohm
Load capacity 150  pF
Stylus pressure 2 grams,  Max. tolerance 0,2 gram
Output voltage 500 µV
Max. tracing capacity 120 µ mm
Channel separation 35 dB at  100 Hz
25 dB at   1 KHz
25 dB at 20 KHz
Frequency range 10 Hz to 30 KHz
Total   THD % 1.5  %
Total unit weight  10 grams (incl. socket screws)
The technical data specified
above are dependent on the
actual arm used in the equipment.
Test Equipment :
Goldmund Turntable / Air Tangent  arm with exterior wiring 
NEUTRIK  AUDIO TEST  A 1  and  TP 402