TECHNICAL SPECIFICATIONS

MC1 MKII

Casing Manually milled and drilled aluminium.
Cover 0,2 mm thick, coated with 24 ct. gold foil.
Color Anodized in gold-colored finish (scratch resistant).
Terminals Soft iron, shaped by grinding and milling.
Connector pins 1,3 mm x 20 mm, 14 ct. solid gold pins.
Screw bushes 2 mm brass threaded bushes mounded into casing.
Magnet Permanent. (Cat.: rare earth magnet)
Power : max. BH (Kj/m3°) 280
Coil 2 mm x 2 mm, soft iron type c 1003 (handwound)
Coil windings 15 micron copper hand-winding wire
Stylus holder Solid Boron rod: 0,3 mm x 7 mm.
Angle of stylus in holder: 0°.
Stylus tip TIP FG-S High Tech diamond, highly polished finish.
Rounded radius 2,5 micron.
Shock absorption High Tech Rubber, 100 SCHOR
Tension wire Steel wire spring, code 1007.

 TECHNICAL DATA

 

Coil impedance 22 Ohm
Load impedance 100 Ohm
Load capacity   150 pF
Stylus pressure 1.8  grams, Max. tolerance 0,1 gram
Output voltage 650 µV
Max. tracing capacity 300 µmm
Channel separation 70 dB at 100  Hz
70 dB at 1   KHz
60 dB at 20 KHz
Frequency range    5 Hz to 80 KHz
Total  THD % 0.3  %
Total unit weight 10 grams (incl. socket screws)
The technical data specified above are dependent on the actual arm used in the equipment.   Test Equipment :
Goldmund Turntable / Air Tangent  arm with exterior wiring 
NEUTRIK  AUDIO TEST  A 1  and  TP 402